Paykareh

Paykareh

Reducing Design Fixation in Ideation by AI, with the Intervention of the Morphological Analysis Method

Document Type : Original Article

Authors
1 M.A. Student in Industrial Design, Industrial Design Department, Faculty of Applied Arts, Art University of Iran, Tehran, Iran.
2 Assistant Professor, Industrial Design Department, Faculty of Applied Arts, Art University of Iran, Tehran, Iran.
3 Assistant Professor, Industrial Design Department, Faculty of Applied Arts, Art University of Iran Tehran, Iran.
Abstract
Introduction: Artificial Intelligence (AI) is emerging as a novel tool in the domain of «human-computer collective intelligence», with the potential to enhance creativity during the design process significantly. Recent studies indicate that leveraging AI enables rapid generation of valuable concepts and improves overall ideation, divergent thinking, and creative output. However, despite AI’s access to vast datasets, the persistent challenge of design fixation, characterized by a limited variety in the resulting ideas and final outputs, remains a fundamental obstacle. This constraint severely complicates the realization of divergence in ideation. The primary goal of the present research is to investigate the effect of the morphological analysis method in reducing design fixation within AI-based ideation processes.
Research Method: This study adopts a mixed-methods (combined) approach and is fundamental in terms of its objective. Essential information for the theoretical framework and literature review was gathered through library resources. For the empirical aspect, an experimental test was conducted in three distinct stages. Data was collected through the execution of the experiment and subsequent evaluation of the results by a panel of experts. The outcomes from direct AI ideation were then compared and analyzed with those obtained when the morphological analysis method was applied in an analogous process.
Findings: A comparison of the results, based on metrics such as the number of ideas, degree of novelty, and percentage of fixation, revealed that while signs of design fixation were observed in both scenarios, the use of the morphological analysis method demonstrably reduced the level of design fixation in the generated ideas. This method was found to increase the number of unique ideas, thereby improving the novelty score. Furthermore, by explicitly breaking down the expected functions, AI used the components in the user’s request as a foundation, leading to the presentation of more complete, holistic ideas.
Conclusion: Integrating morphological chart analysis into AI-based ideation processes is an effective strategy for reducing design fixation and enhancing the novelty and innovation of ideas. Beyond this, its application reinforces divergent thinking and overall creativity
Keywords

Article Title Persian

کاهش تثبیت طراحی در ایده‌پردازی توسط هوش مصنوعی با مداخلة روش تجزیه ‌و ‌تحلیل ریخت‌شناسی

Authors Persian

یزدان پرگشایی 1
ابراهیم باقری طالقانی 2
خشایار حجتی امامی 3
1 دانشجوی کارشناسی ارشد طراحی صنعتی، دانشکده هنرهای کاربردی، دانشگاه هنر ایران، تهران، ایران.
2 استادیار گروه طراحی صنعتی، دانشکده هنرهای کاربردی، دانشگاه هنر ایران، تهران، ایران.
3 استادیار گروه طراحی صنعتی، دانشکده هنرهای کاربردی، دانشگاه هنر ایران، تهران، ایران.
Abstract Persian

مقدمه: هوش مصنوعی به‌عنوان ابزاری نوین در حوزة «هوش جمعی انسان- رایانه» مطرح‌شده است و می‌تواند خلاقیت را در فرآیند طراحی ارتقا دهد. مطالعات اخیر نشان می‌دهد که استفاده از هوش مصنوعی به تولید سریع ایده‌های ارزشمند و بهبود روند ایده‌پردازی، تفکر واگرا و خلاق منجر می‌شود. با این‌ حال، علی‌رغم دسترسی هوش مصنوعی به طیف گسترده‌ای از داده‌ها، مسئلة تثبیت طراحی و محدودیت در تنوع ایده‌ها و نتایج نهایی همچنان چالش اساسی است که مفهوم واگرایی در ایده‌پردازی را با دشواری رو به‌ رو می‌سازد. هدف این پژوهش، بررسی تأثیر روش تجزیه ‌و ‌تحلیل ریخت‌شناسی بر کاهش تثبیت طراحی در فرآیند ایده‌پردازی مبتنی بر هوش‌ مصنوعی است.
روش پژوهش: رویکرد این پژوهش ترکیبی (کیفی-کمی) و از منظر هدف، بنیادی است. اطلاعات مورد نیاز در بخش پیشینه و مبانی نظری، به شیوه کتابخانه‌ای (اسنادی) گرد‌آوری ‌شده‌اند. از نظر روش اجرای پژوهش، یک آزمون تجربی است که در سه مرحله و در فرایند ایده‌پردازی توسط هوش مصنوعی انجام گرفت. داده‌ها از طریق اجرای آزمایش جمع آوری شده و ارزیابی نتایج توسط گروه تمرکز متشکل از متخصصان طراحی صنعتی انجام شده است. نتایج حاصل از ایده‌پردازی مستقیم توسط هوش مصنوعی با نتایج به‌کارگیری روش تجزیه ‌و ‌تحلیل ریخت‌شناسی در فرآیندی مشابه، مقایسه و تحلیل شده‌اند.
یافته‌ها: مقایسة نتایج بر اساس شاخص‌هایی چون تعداد ایده‌ها، میزان تازگی و درصد تثبیت نشان داد که اگرچه در هر دو حالت نشانه‌هایی از تثبیت طراحی مشاهده می‌شود، اما در ایده‌های تولید ‌شده با استفاده از روش تجزیه‌ و ‌تحلیل ریخت‌شناسی، میزان تثبیت طراحی کاهش‌ می‌یابد. این روش موجب افزایش ایده‌های منحصر‌به‌فرد می‌شود که نشان‌دهندة بهبود امتیاز تازگی است. همچنین، با تفکیک عملکردهای مورد انتظار، هوش مصنوعی، اغلب مؤلفه‌های ارائه ‌شده در درخواست کاربر را مبنا قرار داده و ایده‌های کامل‌تری ارائه می‌کند.
نتیجه‌گیری: به‌کارگیری روش تجزیه ‌و‌ تحلیل ریخت‌شناسی در فرآیند ایده‌پردازی مبتنی بر هوش مصنوعی، افزون بر تقویت تفکر واگرا و خلاقیت، راهکاری مؤثر برای کاهش تثبیت طراحی و ارتقای تازگی و نوآوری ایده‌ها است.

Keywords Persian

فرآیند طراحی
ایده‌پردازی
تثبیت طراحی
هوش مصنوعی مولد
روش تجزیه ‌و‌ تحلیل ریخت‌شناسی
- Alipour, L., Faizi, M., Moradi, A. M., & Akrami, G. (2018). A review of design fixation: Research directions and key factors. International Journal of Design Creativity and Innovation, 6(1-2), 22-35. https://doi.org/10.1080/21650349.2017.1320232
- Belaziz, M., Bouras, A., & Brun, J. M. (2000). Morphological analysis for product design. Computer-Aided Design, 32(5-6), 377-388. https://doi.org/10.1016/S0010-4485(00)00019-1
- Cai, A., Rick, S. R., Heyman, J. L., Zhang, Y., Filipowicz, A., Hong, M., Klenk, M., & Malone, T. (2023). DesignAID: Using Generative AI and Semantic Diversity for Design Inspiration. Proceedings of The ACM Collective Intelligence Conference, Delft, Netherlands. 1-11.  https://doi.org/10.1145/3582269.3615596
- Cascini, G., Nagai, Y., Georgiev, G. V., Zelaya, J., Becattini, N., Boujut, J. F., ... & Wodehouse, A. (2022). Perspectives on design creativity and innovation research: 10 years later. International Journal of Design Creativity and Innovation, 10(1), 1-30. https://doi.org/10.1080/21650349.2022.2021480
- Chrysikou, E. G., & Weisberg, R. W. (2005). Following the wrong footsteps: fixation effects of pictorial examples in a design problem-solving task. Journal of Experimental Psychology: Learning, Memory, and Cognition, 31(5), 1134-1148. https://doi.org/10.1037/0278-7393.31.5.1134
- Crilly, N. (2015). Fixation and creativity in concept development: The attitudes and practices of expert designers. Design studies, 38, 54-91. https://doi.org/10.1016/j.destud.2015.01.002
- Crilly, N., & Cardoso, C. (2017). Where next for research on fixation, inspiration and creativity in design. Design Studies, 50, 1-38. https://doi.org/10.1016/j.destud.2017.02.001
- Cross, N. (2021). Engineering design methods: strategies for product design. John Wiley & Sons.
- Hoggenmueller, M., Lupetti, M. L., Maden, W. v. d., & Grace, K. (2023). Creative AI for HRI Design Explorations. Companion of the 2023 ACM/IEEE International Conference on Human-Robot Interaction. Stockholm, Sweden. 40-50.  https://doi.org/10.1145/3568294.3580035
- Hughes, R. T., Zhu, L., & Bednarz, T. (2021). Generative adversarial networks–enabled human–artificial intelligence collaborative applications for creative and design industries: A systematic review of current approaches and trends. Frontiers in artificial intelligence, 4, 604234. https://doi.org/10.3389/frai.2021.604234
- Jansson, D. G., & Smith, S. M. (1991). Design fixation. Design studies, 12(1), 3-11. https://doi.org/10.1016/0142-694X(91)90003-F
- Kershaw, T., Holtta-Otto, K., & Lee, Y. S. (2011). The effect of prototyping and critical feedback on fixation in engineering design. In Proceedings of the annual meeting of the cognitive science society, 33(33), 807-812. https://escholarship.org/uc/item/5kq942pr
- Lee, Y. H., & Chiu, C. Y. (2023). The Impact of AI Text-to-Image Generator on Product Styling Design. International Conference on Human-Computer Interaction. Springer Nature, Cham, Switzerland. 502-515. https://doi.org/10.1007/978-3-031-35132-7_38
- Linsey, J. S., Tseng, I., Fu, K., Cagan, J., Wood, K. L., & Schunn, C. (2010). A Study of Design Fixation, Its Mitigation and Perception in Engineering Design Faculty. Journal of Mechanical Design, 132(4). 041003. https://doi.org/10.1115/1.4001110
- McCaffrey, T. (2012). Innovation relies on the obscure: A key to overcoming the classic problem of functional fixedness. Psychological science, 23(3), 215-218. https://doi.org/10.1177/0956797611429580
- Moreno, D. P., Blessing, L. T., Yang, M. C., Hernández, A. A., & Wood, K. L. (2016). Overcoming design fixation: Design by analogy studies and nonintuitive findings. AI EDAM, 30(2), 185-199. https://doi.org/10.1017/S0890060416000068
- Shi, Y., Gao, T., Jiao, X., & Cao, N. (2023). Understanding design collaboration between designers and artificial intelligence: a systematic literature review. Proceedings of the ACM on Human-Computer Interaction, 7(CSCW2), 1-35. https://doi.org/10.1145/3610217
- Toh, C., Miller, S., Kremer, G. (2014). Mitigating Design Fixation Effects in Engineering Design Through Product Dissection Activities. In: Gero, J. (eds) Design Computing and Cognition '12. Springer, Dordrecht. 95-113. https://doi.org/10.1007/978-94-017-9112-06
- Viswanathan, V., Atilola, O., Esposito, N., & Linsey, J. (2014). A study on the role of physical models in the mitigation of design fixation. Journal of Engineering Design, 25(1-3), 25-43. https://doi.org/10.1080/09544828.2014.885934
- Wadinambiarachchi, S., Kelly, R. M., Pareek, S., Zhou, Q., & Velloso, E. (2024). The Effects of Generative AI on Design Fixation and Divergent Thinking. In: Proceedings of the 2024 CHI Conference on Human Factors in Computing Systems, Honolulu, HI, USA. 1-18.  https://doi.org/10.1145/3613904.3642919
- Wang, S., Okada, T., & Takagi, K. (2023). How to effectively overcome fixation: a systematic review of fixation and defixation studies on the basis of fixation source and problem type [Review]. Frontiers in Education, 8 (1), 1-29. https://doi.org/10.3389/feduc.2023.1183025
- Yilmaz, S., Seifert, C. M., & Gonzalez, R. (2010). Cognitive heuristics in design: Instructional strategies to increase creativity in idea generation. Ai Edam, 24(3), 335-355. https://doi.org/10.1017/S0890060410000235
- Yin, H., Zhang, Z., & Liu, Y. (2023). The exploration of integrating the midjourney artificial intelligence generated content tool into design systems to direct designers towards future-oriented innovation. Systems, 11(12), 566. https://doi.org/10.3390/systems11120566
- Youmans, R. J. (2011a). The effects of physical prototyping and group work on the reduction of design fixation. Design studies, 32(2), 115-138. https://doi.org/10.1016/j.destud.2010.08.001
- Youmans, R. J. (2011b). Design fixation in the wild: Design environments and their influence on fixation. The Journal of Creative Behavior, 45(2), 101-107. https://doi.org/10.1002/j.2162-6057.2011.tb01089.x
- Youmans, R. J., & Arciszewski, T. (2014). Design fixation: Classifications and modern methods of prevention. AI EDAM, 28(2), 129-137. https://doi.org/10.1017/S0890060414000043
Volume 14, Issue 42
Autumn 2025
Pages 29-44

  • Receive Date 13 November 2024
  • Revise Date 07 October 2025
  • Accept Date 28 October 2025